How to Build a Car Brown’s Gas Generator to Save Fuel Costs

Looking for more information on how to build a Brown’s Gas car generator before assembling one yourself? Here are some ideas to get you started.

First of all, one needs to know what this kit is about in order to understand the functions and what needs to be done.

Basically, anyone who uses this car kit, also called a water fuel cell, uses it to improve their vehicle’s gas mileage. It works on the basis of supplying HHO to the combustion chambers for even combustion. The diesel engines in our vehicles are inefficient at burning gasoline, but with the injection of Brown’s Gas, gasoline is burned more completely to power our vehicles. The end result is higher mileage per gallon for our car.

The entire setup is easy and does not require one to have any special technical skills. With a few cheap and readily available accessories like bottles or canisters, wire harnesses, tubes, and pure baking soda to act as a catalyst, a Brown’s car gas generator can be assembled inside a garage quickly.

There are different designs of such a device on the market. With a little searching, you will be able to find many hydrogen conversion kit plans. Forget free plans as many are largely theories. Instead, look for ready manuals with illustrations. These are quite reasonably priced. The cheapest guide is less than $50.

Assembling such a device will take no more than 4 hours if the detailed instructions are followed. Many drivers have done it in 2-3 hours, even for their first experiment.

It will cost no more than $200 to build such a generator for your car. If you’re feeling lazy or challenged, consider buying ready-made ones online, but it won’t be cheap. Most cost more than $1,000.

This system requires little maintenance. A one-gallon can of water is enough to run a vehicle for at least 3-6 months. Power comes from the vehicle’s built-in electrical system and requires no more than 12V. Even this can be adjusted according to your needs.

Users have seen mileage improvements, sometimes as much as 50%, and cost savings of at least $70 to $250. Start building your own Brown’s DIY Car Gas Generator now.